WJ Modular Mounting Brackets

Fits 1999-2004 Jeep Grand Cherokee (WJ)

Laser cut from 0.25” A36 steel. 16-step E-coat with Black textured topcoat.

Use as a base to construct your own bumper, or add your choice of the recovery/protection products we offer below. Each mounting bolt carries shear strength to yield of 4.5 tons. When combined with the MiniMax Modular Recovery Mount, you will rip the assembly out of your uniframe before these brackets will bend or break.

Made in the USA.


Notes & Warranty:

Two brackets, two support plates, six ½”x1.25” Grade 8 bolts with washers, six ½” Grade 8 plated locking flange nuts, and six reusable nylon rivet fasteners included. The accessory mounting bolts, washers & nuts shown are NOT included.

Bumper fascia removal and some drilling required.

"If You Can Break It, We'll Replace It" UNLimited Lifetime Warranty.

Limited Lifetime Warranty (all other products).


Price: $90.50

Ships via: USPS Priority
Out of stock. 

 

 

MiniMax Modular Recovery Mount


Laser-cut 0.25”x3” A500 steel square tube, reinforced 2” receiver hitch, two 0.75” A36 steel shackle tabs. Textured black powdercoat.

This Minimalist design and Maximum strength bolt-on recovery solution nests in the front bumper fascia of your Jeep, almost looks like it came from the factory that way, and gives you just about every option conceivable to get unstuck from anywhere.

The 1/4" thick, 3"x3" steel tube backbone of the MiniMax is almost 50% stronger than our nearest competitor's product and the Working Load Limit of the MiniMax almost doubles the industry standard for Jeep recovery - with a safety factor of 5:1. It features a super-solid 2" receiver hitch able to mount up to a 12,500# winch/cradle as well as box and slot-welded shackle tabs capable of handling 7 tons (14,000 lbs) with our optional Heavy Duty Alloy D-ring Shackles. Your vehicle’s approach angle remains virtually identical to stock, and ground clearance is totally unaffected.

Made in the USA.


Notes & Warranty:

REQUIRES WJ MODULAR MOUNTING BRACKETS ABOVE

Eight ½”x1” Grade 8 phosphated flange bolts and threadlocker included.

99-03 WJs will require the bumper fascia to be trimmed to fit. No trimming is required on 2004 models.

"If You Can Break It, We'll Replace It" UNLimited Lifetime Warranty.


Price: $275.00

Ships via: UPS Ground
Out of stock. 



 

Bull Bar Mounting Brackets


Laser-cut and CNC brake bent 0.19” A36 steel. 16-step E-coat with Black textured topcoat.

Sized and bent from 3/16” steel specifically to mount a Westin P/N 33-1990 (chromed stainless) or 33-1995 (black powdercoat) to our Modular Mounting Brackets. Relocates the bull bar around 6” higher to increase ground clearance and approach angle, as well as increase lateral and horizontal strength and stability.

Made in the USA.


Notes & Warranty:

REQUIRES WJ MODULAR MOUNTING BRACKETS ABOVE

Includes four ½”x1” Grade 8 phosphated flange bolts and ½” Grade phosphated lock nuts (must re-use two ½” bolts when mounting bull bar).

Limited Lifetime Warranty.

 
Price: $35.00

Ships via: USPS Priority
In Stock



 

5/8" Shackle Tabs


Laser-cut 0.75” A36 steel. 16-step E-coat with Black textured topcoat.

When used in conjunction with our vehicle-specific Modular Mounting Brackets, these are a direct replacement for your factory tow hooks with no trimming required and no loss of ground clearance (approach angle suffers slightly). Bolt-on and sized to fit a 5/8” shackle, with a straight line pull WLL rating of 3.25 tons (6500 lbs).

Made in the USA.


Notes & Warranty:

REQUIRES WJ MODULAR MOUNTING BRACKETS ABOVE

Two shackle tabs, eight ½”x2.5” Grade 8 phosphated flange bolts, and eight ½” Grade 8 phosphated locking flange nuts included.

"If You Can Break It, We'll Replace It" UNLimited Lifetime Warranty.

 

Price: $57.00

Ships via: USPS Priority
Out of stock.